<?xml version="1.0" encoding="utf-8"?>
<rss version="2.0">
  <channel>
    <title>照明论坛-LED论坛-照明家族 - 结构工程师</title>
    <link>http://www.lightingfamily.net/forum-686-1.html</link>
    <description>Latest 20 threads of 结构工程师</description>
    <copyright>Copyright(C) 照明论坛-LED论坛-照明家族</copyright>
    <generator>Discuz! Board by Comsenz Inc.</generator>
    <lastBuildDate>Thu, 16 Jul 2026 20:31:56 +0000</lastBuildDate>
    <ttl>60</ttl>
    <image>
      <url>http://www.lightingfamily.net/static/image/common/logo_88_31.gif</url>
      <title>照明论坛-LED论坛-照明家族</title>
      <link>http://www.lightingfamily.net/</link>
    </image>
    <item>
      <title>常见 20 种注塑缺陷及解决方法</title>
      <link>http://www.lightingfamily.net/thread-41067-1-1.html</link>
      <description><![CDATA[常见 20 种注塑缺陷及解决方法]]></description>
      <category>结构工程师</category>
      <author>888888</author>
      <pubDate>Tue, 14 Feb 2023 00:04:32 +0000</pubDate>
    </item>
    <item>
      <title>尺寸链计算方式</title>
      <link>http://www.lightingfamily.net/thread-40974-1-1.html</link>
      <description><![CDATA[尺寸链的计算方法，有如下两种：1、极值解法这种方法又叫极大极小值解法。它是按误差综合后的两个最不利情况，即各增环皆为最大极限尺寸而各减环皆为最小极限尺寸的情况；以及各增环皆为最小极限尺寸而备减环皆为最大极限尺寸的情况，来计算封闭环极限尺寸的方法；极限 ...]]></description>
      <category>结构工程师</category>
      <author>888888</author>
      <pubDate>Tue, 02 Aug 2022 07:18:41 +0000</pubDate>
    </item>
    <item>
      <title>pi膜是什么材料</title>
      <link>http://www.lightingfamily.net/thread-40953-1-1.html</link>
      <description><![CDATA[聚酰亚胺薄膜(polyimide film; PI film)，称为pi膜，是由均苯四甲酸二酐(PMDA)和二氨基二苯醚(DDE)在强极性溶剂中缩合成膜，再经亚胺化而成。颜色呈黄色透明，相对密度1.39-1.45。特别适用于柔性印制电路板和各种耐高温电绝缘材料的基板。

      pi薄膜的分类一 ...]]></description>
      <category>结构工程师</category>
      <author>fdsadfdsid</author>
      <pubDate>Tue, 17 May 2022 06:09:30 +0000</pubDate>
    </item>
    <item>
      <title>如何防止户外LED灯具虹吸现象</title>
      <link>http://www.lightingfamily.net/thread-40749-1-1.html</link>
      <description><![CDATA[]]></description>
      <category>结构工程师</category>
      <author>fdsadfdsid</author>
      <pubDate>Sat, 01 Jan 2022 13:59:43 +0000</pubDate>
    </item>
    <item>
      <title>通止规使用方法</title>
      <link>http://www.lightingfamily.net/thread-40705-1-1.html</link>
      <description><![CDATA[螺纹通止规分别用两个环规往要被检测的外螺纹上拧（顺序随意）。（1）通规不过，（拧不过去）螺纹中径大了，产品不合格。（2）止规通过，中径小了，产品不合格。（3）通规可以在螺纹的任意位置转动自如，止规拧一至两三圈，可能有时还能多拧一两圈，但螺纹头部没出环规 ...]]></description>
      <category>结构工程师</category>
      <author>888888</author>
      <pubDate>Mon, 15 Nov 2021 08:25:33 +0000</pubDate>
    </item>
    <item>
      <title>铁和钢区别？</title>
      <link>http://www.lightingfamily.net/thread-40666-1-1.html</link>
      <description><![CDATA[铁是一种金属元素。钢，是对含碳量质量百分比介于0.02%至2.11%之间的铁碳合金的统称。在蓝色方框内的凝固产物是钢。
铁和钢的区别重点就是含碳量，钢是含碳量为0.03%～2%的铁碳合金，含碳量2%～4.3%的铁碳合金称生铁

含碳量大于2%的是铸铁。铁中加入一定量的碳后后会有 ...]]></description>
      <category>结构工程师</category>
      <author>888888</author>
      <pubDate>Sat, 18 Sep 2021 05:27:22 +0000</pubDate>
    </item>
    <item>
      <title>注塑件常见缺陷原因分析及改善措施</title>
      <link>http://www.lightingfamily.net/thread-40474-1-1.html</link>
      <description><![CDATA[一、缺料1、缺陷原因：成品的细小部位、角落处无法完全成型, 因模具加工不到位或是排气不畅, 成型上由于注射剂量或压力不够等原因, 设計缺陷(壁厚不足)。2、模具改善措施：修正缺料处模具，采取或改良排气措施, 增加料厚, 浇口改善(加大浇口, 增加浇口)。3、成型改善： ...]]></description>
      <category>结构工程师</category>
      <author>888888</author>
      <pubDate>Thu, 17 Jun 2021 07:18:59 +0000</pubDate>
    </item>
  </channel>
</rss>